Electric or Pneumatic Die_Grinder Wheels
WHEEL GRADE A 24 TB F2
Good stock removal rate on steel and non-ferrous metals. A durable performer on welds, burr removal, and for surface conditioning.
WHEEL GRADE A 36 TB F2
Rapid grinding, good finish on steel. Ideally suited for preparation of the clean surfaces needed for good welds, and for finishing & blending of completed welds.
| Max | |||||
|---|---|---|---|---|---|
| DIA x Thick x Arbor | RPM | A16PB | A16PB | Quantity | Weight |
| 2 x 3/16 x 1/4 2 x 3/16 x 3/8 2 x 1/4 x 1/4 2 x 1/4 x 3/8 2 x 3/8 x 1/4 2 x 3/8 x 3/8 2 x 1/2 x 1/4 2 x 1/2 x 3/8 |
30000 30000 30000 30000 27000 27000 27000 27000 |
4001 4003 4005 4007 4009 4011 4013 4015 |
4002 4004 4006 4008 4010 4012 4014 4016 |
25 25 25 25 25 25 25 25 |
2lb 2lb 2lb 2lb 3lb 3lb 4lb 4lb |
| 3 x 3/16 x 1/4 3 x 3/16 x 3/8 3 x 1/4 x 1/4 3 x 1/4 x 1/8 3 x 3/8 x 1/4 3 x 3/8 x 3/8 3 x 1/2 x 1/4 3 x 1/2 x 3/8 |
23000 23000 23000 23000 18000 18000 18000 18000 |
4017 4019 4021 4023 4025 4027 4029 4031 |
4018 4020 4022 4024 4026 4028 4030 4032 |
25 25 25 25 20 20 20 20 |
4lb 4lb 4lb 4lb 5lb 5lb 7lb 7lb |
| 4 x 3/16 x 3/8 4 x 1/4 x 3/8 4 x 3/8 x 3/8 4 x 1/2 x 3/8 |
19000 19000 13500 11900 |
4035 4039 4043 4045 |
4036 4040 4044 4046 |
25 25 20 20 |
6lb 8lb 9lb 11lb |
| 5 x 1/4 x 3/8 5 x 1/4 x 5/8 5 x 1/2 x 5/8 |
10800 10800 9500 |
4049 4051 4053 |
4050 4052 4054 |
25 25 20 |
11lb 11lb 17lb |
| 6 x 1/4 x 5/8 6 x 1/2 x 5/8 |
9040 7950 |
4059 4061 |
4060 4062 |
40 20 |
25lb 25lb |
NOTE:
These wheels are also available in silicon carbide (c), and silicon carbide / aluminum oxide blend (ca) grades. Other sizes also available.
These wheels are also available in silicon carbide (c), and silicon carbide / aluminum oxide blend (ca) grades. Other sizes also available.